Instructions for use of disposable protective masks

Mask structure: It is composed of two layers of spunbond nonwoven fabric and three layers of meltblown nonwoven fabric in the middle.

Instructions:

Open the package and hang the rubber bands on your ears. Press the nose clip of the mask lightly with your hands, use the index fingers of both hands, starting from the middle of the nose clip, move to the sides and press down on the nose clip to shape the bridge of the nose; ensure that the entire mask covers the nose. After each wearing, you must carry out the air tightness check: cover your mask with both hands and exhale. If you feel gas leaking from the nose clip, readjust the nose clip according to step 2. If you feel gas leaking from both sides of the mask, further Adjust the headband position towards the back of the brain.

Functions and features:

It is suitable for protection against bacterial infections and secondary use to avoid cross infection of various pathogens in rabbits. This product can help reduce the exposure level of certain inhalable microbial particulates (such as mold, anthrax, tuberculosis, etc.), but it cannot eliminate contact infection, illness or

3. This product can help reduce the exposure level of certain inhalable microbial particulate matter (such as mold, anthrax, tuberculosis, etc.), but it cannot eliminate the risk of contact with infection, illness or death.

4 This product can help reduce the odor and dust particles in the air into the body.

5. This product is disinfected with ethylene oxide.

Four, matters needing attention:

1. Do not use if the packaging is damaged

2. Only one person can use it at a time.

3. One-time use immediately after opening.

4. For people with certain respiratory diseases, such as asthma or emphysema,

Before wearing protective masks, it is recommended that you should consult a physician.

Production process production (a layer of water-repellent non-woven fabric, a layer of melt-blown fabric and a layer of hydrophilic non-woven fabric plus aluminum strip through the ultrasonic production mechanism 哾 啦 type) Two rubber bands on the four corner points (as shown in the figure below)) acceptance (one by one to verify whether the cover meets the standard) packaging. The entire production process of masks is in a regular disinfection environment.